Unior headset cup remover 1681.1/4

The Unior 1681.1/4 headset cup remover is used to remove stuck or corroded headset cups. It is ideal if you work on MTB and gravel frames with cups from 1.1/4" to 1.1/2".

• Remove stuck or corroded cups without damaging the frame with a hammer blow
• The spring flanges close inside the head tube and open behind the cup
• Also useful for PF30 cups in the same size range
• Suitable for tapered and straight head tubes, depending on the cup size
• One size: check that the cup is between 1.1/4" and 1.1/2"

Technical specifications

• Model code (MPN): 1681.1/4
• Material: tool steel
• Flanges: spring-loaded
• Inner cup diameter: from 1.1/4" to 1.1/2"
• Compatibility: 1.1/4" upper cups on tapered head tubes; 1.1/2" lower cups on tapered head tubes; 1.1/2" headsets on straight head tubes; PF30 cups in the same range
• Intended use: removing stuck or corroded headset and PF30 cups from MTB and gravel frames
• Removal: with a hammer blow from the opposite end
• Variant: 1.1/4" x 1.1/2"