Shimano Deore XT BL-T8100 + Br-M8120 disc brake

The 3-finger lever for hydraulic disc brake Shimano Deore XT T8100 is longer and is compatible with I-Spec II assembly. Compatible with 4-piston caliper, the BL-T8100 lever offers greater braking and intuitive modulation for e-trial bikes. The Shimano Deore XT M8120 brake caliper offers constant and reliable braking in all conditions. The 4 -piston disc brake caliper offers great control and infuses confidence in the descents.

Lever features

• Best Ergonomics & easier control.
• Compatible with 4 pistons caliper for greater braking power, especially for e-trikking bikes.
• Level measure: 3 fingers.
• Real weight: 121 g.

Pinza features

• Pistoni: 4.
• Fast refraction of the pistons.
• The high braking power offers greater safety and control in descents.
• It reduces the noise of oscillation of the disc brake rotor and increases the braking power by 10%.
• Connection: Banjo.
• Fixing screw: 5 mm.
• Braking liquid: Shimano Mineral Oil.
• Pre -installed tablets: n03a ventilated organic.
• Real weight: 168 g.

Technologies

4-Piston

The disc braking system with two opposite pistons of different diameter is characterized by the presence of pistons of different sizes in the front and rear. The system adopts a power transfer mode for which the brake rotor is pressed by the smaller piston at the entrance of the disk headquarters and also by the larger and more powerful piston in the rear. This prevents the joltary movement and significantly reduces noise. In addition, the 4 -piston pliers guarantees a greater contact surface, keeping the size compact, while the efficient positioning of the pads is regulated to the extent necessary to stabilize the pressure. The combined use with the servvowave lever provides an extraordinary 50% increase in braking power compared to the previous model.

Ice Technologies

The incorrect configuration of the disk brake rotor and pads during braking on a long descent, for example, exerts a negative impact on the brake performance. Shimano has adopted the disk brake rotor and Ice Technologies pads to obtain a cooling technology capable of guaranteeing constant performance. The shovel of the coated disc brake rotor, equipped with a 3 -layer sandwich structure in stainless steel, aluminum and stainless steel, guarantees better heat dispersion (from 400˚C to 300˚C of temperature on the surface). The cooling flap for the tablet guarantees less wear, less noise, less loss of efficiency and greater lightness.

I-Spec EV

I-Spec EV Create a clean and optimized cockpit that allows greater concentration and greater comfort for a wide range of cyclists.

Advantages and benefits

• The largest adjustment range allows cyclists of the most varied styles, preferences and builds to find the position of the leverage and the optimal command.
• Ergonomic design, faster access to leverage and fluid operation improve driving comfort and concentration.

I-Spec EV increases the rigidity of the brake lever by moving the band inward to create a further point of contact between the handlebar and the lever. This further support significantly increases bike control and brake response, keeping a space between the band and the support point for other accessories to be mounted on the handlebar.